Company News

Four points to pay attention to when screw air compressor is running

Author : Runningway

Update time : 2021-08-23 16:35:15

Screw air compressors are the most commonly used models in the air compressor market today. In the screw air compressor, there are two types of twin screw and single screw. Nowadays, twin-screw air compressors are commonly used in the market, and the twin-screw design is more reasonable and stable.

When using screw air compressors, the following 4 aspects need to be considered by users:

1. Consider the use environment of screw air compressors
The use environment of the air compressor mainly refers to the site selection and establishment of the air compressor station. The air compressor should be placed in a well-ventilated place to avoid direct sunlight and rain; it should be built on hard soil, between walls, There is a certain distance between the tops; the relative humidity of the air should be low, and there should be less dust and impurities.

2. Consider the working temperature of the screw air compressor
The working temperature refers to the ambient temperature in which the air compressor is working. If the temperature of the working environment is relatively high, corresponding cooling measures should be taken. At the same time, use lubricating oil with high viscosity and high flash point; the ambient temperature is low and will not What's the bad effect. When the air compressor starts at a very low temperature (below 0°C), you need to pay attention to it, and be careful that the lubricating oil is condensed inside.

3. Consider the lubrication method of screw air compressor
The lubrication methods of screw air compressors can be divided into two types: oil lubrication and oil-free lubrication. Oil-lubricated screw air compressors are commonly used in the market, which can almost meet all kinds of air demand through post-processing equipment; Oil-lubricated screw compressors are relatively expensive and are suitable for industries that require high compressed air quality, such as medicine and food.

4. Consider the speed of screw air compressor
Rotational speed is an important parameter of screw air compressors. Too high a rotation speed is not good, and too low a rotation speed is not good either. If the speed of the air compressor is too high and the rotor cannot bear it, the service life of the air compressor will be greatly reduced; if the speed is too low, the exhaust volume and exhaust pressure will not meet the requirements of the working conditions, and it will "run oil" seriously. .

Previous : Safety instructions for air compressor operation

Next : What should be paid attention to when changing the oil during air compressor maintenance?