Industry News

What is the root cause of the low gas production of oil-free air compressors?

Views : 1032
Author : Runningway
Update time : 2019-12-18 09:06:36
During the operation of oil-free air compressors, occasionally insufficient air supply may occur. What causes it? In fact, the machine selection, air leakage, gas production standards, machine wear and other aspects may produce insufficient gas supply, which will cause the equipment in the production workshop to operate normally.

What are the causes of insufficient air supply of oil-free air compressors?
First, leak
This is the most likely cause of this failure. You can start the oil-free air compressor and stop it when the gas storage tank has a certain pressure (a little more than atmospheric pressure). Then use your ears to listen to any leaks at the joints of the external pipes, gas supply pipes, check valves, safety valves, pressure switches, etc. If there is an air leak, this needs to be repaired

Second, the gas demand exceeds the maximum gas supply value
Your gas demand has exceeded the maximum gas supply of the oil-free air compressor, and the machine is overloaded. At this time, even if it keeps producing gas, it can't meet your needs. Maybe you think it's not producing enough gas. We have encountered this case several times, so please check carefully if your gas consumption has increased recently.
Related News
Can air compressor lubricating oil be mixed?
Feb .20.2023
Can you mix lubricating oil? Many people think that there is no big problem with the mixed use of lubricating oil, but in actual cases, there are many problems caused by the hasty mixed use of lubricating oil, so it is very important to understand the kno
Top Ten Top Compressor Manufacturing Powers In The World
Oct .20.2022
Top Ten Top Compressor Manufacturing Powers In The World
Why Do Air Compressors Need Staged Compression? Can't You Compress It Once?
Oct .09.2022
Many people know that the two stages of the compressor are suitable for producing high pressure, and the first stage is suitable for producing large amount of air. Sometimes, you need to perform more than two compression operations. Why do you need to per