How do you store Ingersoll Rand air compressor accessories, and what are the methods?
Views : 1784
Author : Runningway
Update time : 2020-04-17 13:17:52
How will you store the Ingersoll Rand air compressor parts? What are the methods? How to store the newly purchased Ingersoll Rand air compressor parts? Before they are used, they are usually stored in the warehouse. At this time, the space should be kept dry. , And can not contact with other corrosive components. Wrap with oil paper and other things to avoid rust. Mark the item name in detail, which is more convenient when searching, reducing the chance of error. The storage requirement is to not affect the performance of components as a purpose, to eliminate waste.
After the air compressor is shut down, how to store the used air compressor parts? What kind of method should be used for the used parts because the machine is shut down for a long time? The parking place, indoor is the first choice, reducing the possibility of sun and rain . If the conditions are not allowed, they can only be placed outside, and the outside must be covered. At the same time, good maintenance is done, and the oil, condensate, etc. are discharged cleanly. This is done from the perspective of good condition, arrangement and internal structure. The purpose is that the device can operate smoothly when it is turned on again.
These are the most basic requirements for the storage of air compressor accessories. The maintenance and testing methods of each period should be mastered, so that the operation will be more rationalized. The cylinder is the part of the reciprocating compressor that compresses the gas, it bears the pressure of the gas, the friction between the mirror surface and the support ring of the piston ring, and the heat generated when the gas is compressed. The structure of the cylinder is complicated, with air passage, water passage and air valve cavity. The cylinder requires sufficient strength, hardness and roughness to resist wear, and good heat transfer performance.
The upper part of the cylinder has a cylinder head, and the lower part has a cylinder seat, forming the working volume of the cylinder. The cylinder of the compressor is made of cast iron. After many years of operation, there are different degrees of wear or scratches, especially the wear and scratches of high-pressure cylinders are more serious, which will accelerate the wear of the live plug ring and the support ring, and cause the live plug ring to gas. Reduce efficiency and increase power consumption.
Main engine: main engine (head), bearing, shaft seal oil seal, shaft sleeve, gear, gear shaft, overhaul.
Maintenance kit: maintenance kit for host, unloading valve, pressure maintenance valve, rotary valve, temperature control valve spool, intake valve, coupling elastomer and other maintenance kits.
Cooling: fan, radiator, heat exchanger, oil cooler, rear cooler.
Switch: pressure switch, temperature switch, emergency stop switch, differential pressure switch.
Transmission: coupling, elastomer, plum blossom pad, elastic block, gear, gear shaft.
Ingersoll Rand air compressor accessories, Ingersoll Rand temperature control valve spool, Ingersoll Rand inlet valve
Login 
Inquiry List
