Professional cleaning and maintenance air compressor process
Views : 59
Update time : 2021-05-13 15:27:18
After the air compressor has been running for a certain period of time, it needs to do some maintenance work such as maintenance and cleaning of fixed parts. This kind of work is generally recommended to be operated by professionals to avoid damage to the machine due to wrong operations.
Under normal circumstances, the air compressor equipment will be handed over to a professional equipment service company for regular cleaning and maintenance by the enterprise factory. Professionals professional technical operations can avoid unnecessary air compressor damage and failure. So how do professional air compressor technicians carry out the maintenance and cleaning of air compressors? This time we will briefly describe.
First of all, the air compressor must be cleaned such as three filters, valves, paint buckets, nose, oil pipes, radiators, air intakes and so on. First, let the air compressor to be cleaned run normally for ten minutes to ensure that the air compressor is normal and safe before maintenance; then stop the air compressor to release the internal pressure, open the inlet of the oil and gas barrel, and turn the air compressor The cleaning agent is introduced, and then the machine is turned on for cleaning without load. After the cleaning operation lasts for about 30 minutes, the air compressor is turned off, and after the pressure is relieved, the old lubricating oil inside the air compressor is completely drained, and new oil is added to complete a cleaning inside the air compressor.
In addition, the oil filter, air filter, oil separator and other equipment components are disassembled, maintained or replaced, and the corresponding model must be used when replacing. Then disassemble the intake valve part and clean these parts with detergent or soapy water. While cleaning, check whether the valve structure is damaged or not. If it is damaged, it needs to be updated. After washing, make sure the valve parts It can be reinstalled if it is normal.
Many valve controls of the air compressor can be disassembled and cleaned directly. The pressure valve can be taken out by unscrewing the screw directly. The back check valve can also be disassembled and then cleaned as a whole. The temperature control valve can also be disassembled for cleaning, if it is not a professional technique. Personnel should not operate rashly, as additional faults are prone to make it difficult to troubleshoot.
After all parts of the air compressor have been cleaned and reinstalled, you can start the test run of the air compressor to see if it is operating normally and whether the operating parameters of the air compressor have changed. Generally, the air compressor is being cleaned and maintained. After that, the operation will be smoother, and the operating temperature will also drop significantly.