Basic maintenance of silent oil-free air compressor
Views : 948
Author : Runningway
Update time : 2019-11-21 09:42:38
The basic protection of the silent oil-free air compressor, the silent air press has the advantages of simple structure, simple operation, less wearing parts, convenient replacement of accessories, low noise, safe and reliable operation, and is widely used in enterprises. However, if the protection measures are incorrect or improperly operated, it will lead to increased equipment failure and shortened service life, and then affect the normal operation of the unit.
After investigation and interviews, it was found that more than 80% of the users did not remember or remember to do the protection work during the process of using the empty! In fact, the service life of the air-printing press and the user's operation are very arrogant, so we need to do the following: Basic protection work:
First, regular drainage
During the operation of the air compressor, liquid water will accumulate in the air tank for construction due to the compression of the air body, which will reduce the available volume and further increase the operating frequency of the air compressor. The power consumption of the empty press and the user is helium! Therefore, the drainage protection should be carried out according to the instructions in the manual or the marking on the product. It is recommended to drain once every three days to one week.
Second, replace the air intake filter.
If the filter element of the air filter cleaner is used for too long, dust and other particles can block the filter hole. If it is not replaced regularly, the intake power will be greatly reduced in the later stage. Therefore, it is advocated that the user decides the replacement cycle according to the amount of dust in the application place, and generally advocates replacing the filament geotextile at least every six months! The color of the filter element can be checked. The normal color should be bright yellow. If it becomes dark or dark, replace it immediately.
Third, use the environment to view
The operating environment of the empty printing press should be kept ventilated, and there should be no large amount of fine particles, dust, dust, etc. At the surgery site. Keep the environment regular, arrange the items regularly, and eliminate potential safety hazards.