Daily measures to avoid blockage of air compressor radiator
Views : 717
Author : Runningway
Update time : 2021-03-12 16:52:13
Users who have used air compressors know that the air compressor cooler is a machine used for cooling and cooling, which can better maintain the continuous operation of the air compressor. The cooler is an important part of the air compressor. If the cooler breaks down and becomes clogged, the air compressor oil passing through the cooler will not be effectively cooled. The high temperature oil will easily cause the air compressor to operate normally and cause a trip. So how to avoid the blockage of the air compressor cooling?
One, first do a good job in the selection of the air compressor station. The location of the air compressor station is very important. Do not place it in a place where the relative humidity is greater than 85%, or exposed to the sun, rain, wind, or relative humidity. Do not place it in a dusty, corrosive or flammable gas environment. Do not place it in a place where there is vibration or condensation water may freeze. Do not get too close to the wall to avoid poor ventilation. It is necessary to use it in an environment with corrosive gas, and you should choose a dryer with rust-proof copper tubes or a stainless steel heat exchanger type dryer. It should be used at an ambient temperature of 40°C or less. The ventilation effect of the air compressor station must be done well, otherwise the high temperature in summer will be very troublesome.
Second, to prevent the lack of air compressor oil or the deterioration of oil quality. Air compressor lubricants are like human blood and play a very important role in screw air compressors. The amount of lubricating oil in the air compressor should be in place. If the oil is low, the exhaust temperature of the air compressor will be high, causing high temperature tripping. If the oil is too dirty, it needs to be replaced in time, otherwise it will not be able to provide lubrication and cooling.
Third, secondly, prevent the filter from being too dirty and clogging. Air compressor filters: air filters, oil filters, oil and gas separators, as the name suggests, are used to filter out dust, particles and other impurities in the air to prevent impurities from entering the compressor and affecting the normal operation of the air compressor Running. If the filter is clogged, the oil path will be blocked and the amount of oil entering the main engine will be less.
Login 
Inquiry List
