Reasons for the application of the Ingersoll Rand vortex air compressor in the pharmaceutical industry
Views : 1845
Author : Runningway
Update time : 2019-04-10 09:13:34
The Ingersoll Rand vortex air compressor is made up of two moving and stationary scrolls of a double function equation. During the process of suction, compression and exhaust, the static plate is fixed on the frame, and the moving plate is driven by the eccentric shaft and is restricted by the anti-rotation mechanism, and rotates around the center of the base circle of the static disk with a small radius. The gas is sucked into the periphery of the stationary disk through the air filter. As the eccentric shaft rotates, the gas is gradually compressed in a plurality of crescent-shaped compression chambers combined with the dynamic and static disk phasing, and then continuously discharged from the axial holes of the central portion of the stationary disk.
This air compressor is the latest air compressor developed in the past 20 years. Compared with the traditional air compressor, it has a novel structure, small size, light weight, low noise, long service life and stable and continuous gas transmission. It is easy to operate, low maintenance cost and other excellent technical performance. It is praised as “no maintenance air compressor” and “new revolutionary air compressor” in the industry. It is the ideal model for air compressors below 50HP.
Therefore, the compressed air used in the preparation is in direct contact with the drug, so the compressed air must be purified; it must be verified to prove that the system meets the production requirements; it must also pass the GMP certification inspection. The gas used for the preparation, such as drying, pressing, etc., must control the content of oil, water and solid particles, and biological particles in the compressed air, and also requires odorless.
The gas quality indicators for preparations are generally required to be: The compressed air used in the manufacturing and process operations, including the sterilization process, should be:
1. Supplyed by oil-free air compressors, oil-free and oil-free, except in non-controlled environmental areas.
2. To prevent condensation from appearing in the pipeline, the air must be dehumidified.
Login 
Inquiry List
