How to judge the blockage of the air compressor oil and gas separator?

How to judge the blockage of the oil and gas separator, we can judge from the instrument changes, the pressure, temperature and other changes of the air compressor are related to it. When a fault occurs, no matter how much oil is added, it will definitely not flow to every place in the system, and the desired lubrication effect will not be obtained. What follows is a sharp increase in friction and high internal temperature, which will cause a series of abnormalities.
 
Not only the temperature changes, but the pressure will continue to increase. Overcurrent is also a negative problem caused by oil blockage. In short, there must be no way for an air compressor to operate normally. How to judge: whether the oil pressure rises; the current changes; the motor is overloaded... In addition to these, the most direct thing is to observe from the control panel, when the oil fine separator is really blocked, there will be a display on it.

Of course, it does not mean that the blockage can only be proved when all phenomena exist. No matter which one occurs, it may be caused by the current problem. In daily life, the filter element itself is a easily damaged component. The spare parts in this area should be prepared, and the maintenance or replacement records and regular maintenance can fundamentally reduce the occurrence of failures. Accurately analyze the data to avoid wrong judgments, which will not only delay the repair speed, but also cause greater economic losses. How to judge the blockage of the oil fine separator can basically be summarized as these. No matter what the cause of the shutdown, you must first analyze and then implement the solution, so as to truly reduce the time.