Company News

How to avoid carbon deposits in the head of screw air compressor?

Author : Runningway

Update time : 2021-06-15 15:29:36

In the case of serious carbon deposits in the head of the screw air compressor, the rotor disc will not move, and the air compressor will be over-current, which will not start the machine at all. This is the fault content found during a certain maintenance. After inspection, it was found that the rotor A large amount of jelly is adhered to various places such as oil pipes and oil pipes.

Based on the above performance, how can we find the cause?

Start with the lubricating oil and judge according to the elapsed time and changes. If the lubricating oil turns black or other abnormalities, it should be replaced. When everything is normal, it can be ruled out, but it is not that it causes serious carbon deposits in the body.

So, start to analyze the next condition. In the filter system, whether there are too many particles entering the machine head, under the condition of constant temperature changes, oxidation reactions are accumulating, which accelerates the formation of carbon deposits. Ask the operator about the daily record of the screw air compressor and observe whether there is a high temperature condition. The cooling and cooling device must ensure that its function is normal. And according to the actual environment, strengthen the improvement of these aspects.

The screw air compressor head has serious carbon deposits. The parts with carbon deposits are removed, and then soaked in a special cleaning fluid. The time is arranged according to the amount of adherents, and the flushing effect must be guaranteed. The air compressor system is in a completely clean state.

During operation, the body temperature must be controlled within the required range, and the signal sent out must be paid attention to. Once the high temperature is found, the cause must be found and eliminated immediately; the filter element must be cleaned and replaced regularly.

Completing these contents can basically solve the problem of serious carbon deposits in the head of the screw air compressor.

Previous : Maintenance Of Intake Valve Of Screw Air Compressor

Next : What is the reason for the decrease in air quality of Ingersoll Rand screw compressors?